Carte 1 · Leçon 4 sur 4 · ~7 min
The cantilever, and the drawing that tells the truth
Les leçons sont en anglais pour l'instant.
A diving board. A balcony. A shelf bracket. Our wall bracket. Each is held firmly at one end and free at the other: a cantilever.
To see what a cantilever has to survive, engineers draw it alone: cut it free from the wall and replace the wall by what the wall does to it. That sketch is a free-body diagram, and it is the most useful drawing in mechanics, because it cannot hide a force.
What the wall does. Two things, and only two:
- it pushes up with a force
R, so the bracket does not fall; - it holds back a moment at the root,
M, so the bracket does not rotate and swing down.
The bracket is still. So the pushes balance: R equals the load W. And the turns balance: the wall's M equals the load's turning effect. That second balance is the one that sizes the bracket.
Tap a symbol to find it in the drawing.
- M
- the moment at the root, where the bracket is held, in N·mm
- W
- the load's weight, hanging at the tip, in N
- L
- the lever arm, from the centre of the bolt pattern to the load, in mm
- R
- the wall's upward push, equal to W
In one sentence
The wall must hold back the load's whole turning effect: the load times its distance from the root.
Where it comes from
Take moments about the root, the point where the bracket is held. Which forces have a lever arm about that point?
Racts at the root. Its arm is zero, so it turns nothing.Wacts at the tip, a distanceLaway. It turns the bracket with a momentW · L(lesson 3).
For the bracket to stay still, the wall must turn it back by exactly the same amount. So the moment at the root is M = W · L.
Cut the bracket anywhere else and only the part of L beyond the cut pushes on it. So the moment is largest at the root and zero at the tip. That is why brackets crack at the root, and why the root is where we size them.
Check it makes sense
- Units. N × mm = N·mm, as every moment is.
- Where is it biggest? At the root. Look at the triangle under the bracket in the picture: tall at the wall, nothing at the tip.
- Twice as long, twice the moment.
Lappears once, not squared.
The trap
Borrowing a formula from a different beam. W · L / 2 is the load spread evenly along the bracket. W · L / 4 is a load in the middle of a beam resting on two supports. L² comes with a spread load too. Our load hangs at one point, at distance L, from a beam held at one end: M = W · L, nothing more.
Worked, on the practice bracket
The practice bracket, steps 1 and 2 of the challenge in a row:
| Step | Working | Result |
|---|---|---|
| 1 · The load | W = m · g = 25 × 9.81 | 245.25 N |
| 2 · The root moment | M = W · L = 245.25 × 440 | 107 910 N·mm |
Your turn, half done
A load of W = 205 N hangs at the tip of a bracket, L = 480 mm from the centre of its bolts. What moment must the bolts hold back at the root?
M = W · L = 205 × 480 = 98 400 N·mm.
Your turn
The card's final, in two steps, just like the challenge. A water tank of 28 kg hangs from a wall bracket, 520 mm from the centre of its bolts.
Step 1: what force does the tank pull with?
W = m · g = 28 × 9.81 = 274.68 N.
Check yourself
Step 2: with that force at 520 mm, what is the moment at the root?
M = W · L = 274.68 × 520 = 142 834 N·mm.
Check yourself
A classmate writes M = W · L / 2 for our bracket. Which bracket does that formula actually describe?
A load spread evenly along the length. Its weight acts, on average, halfway out, so its arm is L / 2. Ours hangs at the tip: the whole L.
What you can do now: draw a cantilever alone, name what the wall does to it, and find its root moment in N·mm. That is steps 1 and 2 of the wall bracket challenge, done.
Étape 1 sur 13 · ~7 min restantes