Carte 1 · Leçon 3 sur 4 · ~6 min
The turning force
Les leçons sont en anglais pour l'instant.
Why is a door handle on the side away from the hinges? Try pushing a door right beside its hinge: you push hard and it barely moves. Push at the handle and one finger will do.
The force is the same. What changed is how far from the pivot you pushed. Engineers have a name for force-with-distance: the moment. It is what bends a bracket, and it is the number the rest of this branch is built on.
Tap a symbol to find it in the drawing.
- M
- the moment: how hard the force twists, in N·mm
- F
- the force, in newtons (N)
- d
- the lever arm: the distance from the pivot to the force's line, in mm
In one sentence
How hard a force twists is the force times how far it is from the pivot.
Where it comes from
Archimedes wrote this rule down more than two thousand years ago, and you can feel it on a see-saw. A child far from the middle balances a heavier adult sitting close in, and they balance exactly when force × distance is the same on both sides. It is not the force that has to match, and not the distance: it is their product.
That product is the moment. A long spanner turns a stuck nut because it makes d big, so a normal push makes a big M.
One detail matters: d is measured square to the force, from the pivot to the line the force acts along. Push along the spanner, towards the nut, and d is zero: nothing turns, however hard you push.
Check it makes sense
- Units. N × mm = N·mm. A moment is never in N alone, and never in mm alone.
- Double the force, double the moment. Double the arm, double the moment. Nothing is squared here.
- Zero arm, zero moment. Pushing on the hinge does nothing: check your picture agrees.
The trap
Measuring the arm from the wrong point. On a bracket the pivot is the centre of the bolt pattern, where the bracket is held, not the face of the column and not the end of the plate. A wrong starting point gives a wrong arm, and every number after it inherits the error.
Worked, on the practice bracket
On the practice bracket, a load of 245.25 N hangs 440 mm from the centre of the bolt pattern.
M = F · d = 245.25 × 440 = 107 910 N·mm
Your turn, half done
A mechanic pushes down with 150 N on a spanner, 250 mm from the centre of the nut. Here F = 150 N and d = 250 mm. What moment turns the nut?
M = F · d = 150 × 250 = 37 500 N·mm.
Your turn
A shop sign weighs 90 N and hangs 320 mm out from where its arm is bolted to the wall. What moment does it put on the bolts?
M = F · d = 90 × 320 = 28 800 N·mm.
Check yourself
A load hole is 330 mm from the column face. The centre of the bolt pattern is 45 mm from the column face. Which lever arm do you use?
285 mm: from the centre of the bolt pattern to the load, which is the column-face distance minus the offset. The bracket is held at its bolts, so that is where the arm starts.
What you can do now: find the moment any force makes about any pivot, and say where the arm is measured from.
Étape 1 sur 11 · ~6 min restantes