Carte 1 · Leçon 2 sur 4 · ~5 min
Units that carry you
Les leçons sont en anglais pour l'instant.
Engineers on a drawing board work in newtons and millimetres, and so does this path. Not because metres are wrong, but because of what comes out at the other end.
A drawing is dimensioned in millimetres. A load is a force in newtons. Keep both, and a stress comes out in N/mm², which is exactly a megapascal (MPa): the unit every steel is sold in. No conversion, no chance to slip by a factor of a million.
Tap a symbol to find it in the drawing.
- M
- a moment: a force times a distance
In one sentence
A metre is a thousand millimetres, so a newton-metre is a thousand newton-millimetres.
Where it comes from
A moment is a force times a distance (lesson 3 shows why). Change the unit of the distance and nothing physical changes: the same spanner, the same push. Only the number changes.
Measure the same distance in millimetres instead of metres and the number becomes a thousand times bigger, because each millimetre is a thousand times smaller. The force has not moved, so the moment's number grows by the same thousand.
Check it makes sense
- A smaller unit gives a bigger number. N·mm are small, so a moment in N·mm is a big number: hundreds of thousands, for a bracket.
- One family per calculation. Millimetres with millimetres, metres with metres. Mix them inside one line and the answer is out by a thousand, silently.
The trap
Dividing when you should multiply. Going from N·m to N·mm the number must get bigger. If yours got smaller, flip it. The same goes for kN to N: a kilonewton is a thousand newtons, so the number grows.
Worked, on the practice bracket
The practice bracket's root moment is 107 910 N·mm. In N·m the number is a thousand times smaller: the same moment.
The final challenge accepts your answer in either unit, N·m or N·mm, kN or N. What it cannot do is fix a calculation that mixed them halfway through.
Your turn, half done
A spanner puts a moment of 48.6 N·m on a bolt. Multiply by a thousand: what is that in N·mm?
48.6 × a thousand = 48 600 N·mm. Bigger number, smaller unit, same moment.
Your turn
A load cell reads 1.75 kN. What is that force in newtons?
A kilonewton is a thousand newtons: 1.75 kN = 1750 N.
Check yourself
Which of these is exactly the same as 1 MPa?
1 N/mm². A megapascal is a million pascals, and a square metre is a million square millimetres, so the two millions cancel. That is the reason to work in N and mm: stresses come out in MPa by themselves.
What you can do now: move between N and kN, N·m and N·mm, without losing a factor of a thousand, and say why a stress in N/mm² is already in MPa.
Étape 1 sur 11 · ~5 min restantes