Skip to content
← The path

Card 1 · Lesson 2 of 4 · ~5 min

Units that carry you

Engineers on a drawing board work in newtons and millimetres, and so does this path. Not because metres are wrong, but because of what comes out at the other end.

A drawing is dimensioned in millimetres. A load is a force in newtons. Keep both, and a stress comes out in N/mm², which is exactly a megapascal (MPa): the unit every steel is sold in. No conversion, no chance to slip by a factor of a million.

Part 1 of 11 · ~5 min left