Skip to content

Academy · Guided path

Free

Engineering Thinking

From a load to a part.

Short lessons, one part at a time. Every formula comes with a drawing, where it comes from, the trap, a worked example and a check you answer yourself. No account: your progress stays on this device.

You need

  • School maths: multiply and divide, squares and square roots, and turning a = b · c into c = a / b
  • A calculator
  • No physics beyond this: things have weight

You will be able to

  • Turn a hanging load into a force and a bending moment
  • Size a steel plate for strength and for stiffness, with a safety factor
  • Choose a plate thickness you can actually buy
  • Read a dimensioned drawing and its datums
  • Model the part and send a STEP file a checker accepts
Start the path
  1. Card 14 lessons · ~23 min

    Forces and moments

    Draw a cantilever's free-body diagram and find its root moment in N·mm

    0 of 4 lessons done
    1. 1A kilogram is not a newton~5 min
    2. 2Units that carry you~5 min
    3. 3The turning force~6 min
    4. 4The cantilever, and the drawing that tells the truth~7 min
  2. Card 22 lessons · ~12 min

    Stress and strength

    Say what an allowable stress is, and compute one with a safety factor

    0 of 2 lessons done
    1. 1Force spread over an area~6 min
    2. 2Yield, and why the safety factor goes on the steel~6 min
  3. Card 33 lessons · ~21 min

    Bending and shape

    Size a rectangular section for a moment, and say why its depth is squared

    0 of 3 lessons done
    1. 1How a plate carries a moment~7 min
    2. 2Why depth counts twice~8 min
    3. 3Sizing the plate, and buying steel that exists~6 min
  4. Card 42 lessons · ~15 min

    Strong is not enough

    Check a tip deflection against its limit, and say whether strength or stiffness decides

    0 of 2 lessons done
    1. 1Strong is not stiff~8 min
    2. 2Two checks, one answer~7 min
  5. Card 5Coming

    From numbers to a part

    Read a dimensioned drawing and its datums, then model the plate and export a STEP file the checker reads

    This part ends with the 4TUNHub Lab's checker, which reads the part you model. It opens here when the checker does.

    Opens after: Card 1

  6. CheckpointComing

    The warm-up beam

    Clear a short chain on numbers nobody else has

    This part ends with the 4TUNHub Lab's checker, which reads the part you model. It opens here when the checker does.

    Opens after: Card 1, Card 2, Card 3

  7. Final challengeComing

    The wall bracket

    Take one real part from a load to a checked STEP file, with a manufacturing review and a cost in FCFA

    This part ends with the 4TUNHub Lab's checker, which reads the part you model. It opens here when the checker does.

    Opens after: Card 1, Card 2, Card 3, Card 4, Card 5, Checkpoint