Card 3 · Lesson 3 of 3 · ~6 min
Sizing the plate, and buying steel that exists
You know the section modulus the bracket needs (lesson 1) and what a plate's section modulus is (lesson 2). The drawing fixes the depth b. One thing is left to choose: the thickness t.
Tap a symbol to find it in the drawing.
- t
- the thickness that gives exactly the section modulus needed, in mm
- Z
- the section modulus needed, from lesson 1, in mm³
- b
- the plate's depth, fixed by the drawing, in mm
In one sentence
Turn the section modulus round to find the thickness, then buy the next plate up that a workshop actually stocks.
Where it comes from
Start from Z = t · b² / 6. Multiply both sides by 6 and divide both by b²: t = 6 · Z / b².
That t is the thickness that is exactly strong enough, and it is almost never a thickness you can buy. Steel plate comes in fixed sizes; the brief lists the ones stocked locally. So you buy the next size up. Every size below it has less Z than the bracket needs, however close it looks.
Check it makes sense
- Units. mm³ ÷ mm² = mm.
- A deeper plate needs less thickness, and by the square:
b²is underneath. - The bought plate is never thinner than the formula's. If it is, you rounded the wrong way.
The trap
Rounding to the nearest. When the formula's thickness sits just over a stock size, the size below looks close enough. It is not: it is short of the strength you just worked out. Always up.
And forgetting the square: dividing by b instead of b² gives a thickness b times too big.
Worked, on the practice bracket
The practice bracket, steps 5 and 6:
| Working | Result | |
|---|---|---|
| Thickness needed | t = 6 · Z / b² = 6 × 981 / 30² | 6.54 mm |
| Thickness bought | the next stock size up | 8 mm |
Your turn, half done
A plate 40 mm deep needs a section modulus of 3000 mm³. So t = 6 × 3000 / 40². What thickness is exactly enough?
6 × 3000 / (40 × 40) = 11.25 mm.
Your turn
Two steps, like the challenge. A bracket 45 mm deep needs a section modulus of 1800 mm³.
Step 1: what thickness is exactly enough?
t = 6 · Z / b² = 6 × 1800 / 45² = 5.3333 mm.
Check yourself
Step 2: the workshop stocks 6, 8, 10, 12, 15 and 20 mm plate. Which one do you buy?
The next size up from 5.3333 mm: 6 mm.
Check yourself
Strength needs t = 8.1 mm. The stock is 6, 8, 10, 12, 15 and 20 mm. Which plate do you buy?
10 mm, the next size up. 8 mm is short of the strength you need, however little. 12 mm is not wrong steel, but it is not what the numbers ask for: the safety factor is already in σ_allow, and a second one, added by eye, is heavier and dearer for nothing. (Card 4 may still send you up a size, for stiffness. That is a reason worked out, not a guess.)
What you can do now: turn a section modulus into a thickness, and buy a plate that exists. That is steps 5 and 6 of the wall bracket challenge: the plate is strong enough. Card 4 asks whether strong is enough.
Part 1 of 12 · ~6 min left